= Line of packs and airtight packaging of the basalt insulation plates, Kyiv

Обладнання призначене для прийому з лінії виробництва плит і подальшого транспортування продукту до установки для формування пачок утеплювача принципом багатоповерховості, з подальшою герметичною упаковкою.

КОМПЛЕКТАЦІЯ ЛІНІЇ:

1 - receiving tape conveyor with adjustment of height of reception;
2 - roller drive conveyor 1 with a transverse chain drive;
3 - roller drive conveyor 2 (buffer);
4 - Reception Transfer of Packing Machine;
5 - Knot formation of packs;
6 - control unit;
7 - Transverse Action Knot;
8 - clamp;
9 - upper traverse of the side ark;
10 - Lower Travers of Side Acknowlede;

Specifications:
Productivity - 1.0 - 8.0 pcs/min
Overall Line Dimensions (DShVHV) - 4300*2500*2200 mm
= Transporters drive - - motor editor

Швидкість транспортеру подачі в станок формування пачок та упаковки - 0-360 мм/сек., регулюється
= The exit time of the plate from the technological line - from 5.5 to 60 sec.
The period between the outputs of the technological line plates - not less than 2 sec.
Ambient temperature when using equipment - -50C / +400C
The size of the plate that is transported and packed - 1000x600x50 mm
The weight of the plate is two types: from 4 to 10 kg; from 1.5 to 4 kg
Plate material - basalt fiber insulation plates
Plate density - from 25 to 150 kg/m3
The number of plates on the conveyor of the machine formation of packs - from 1 to 8 plates/min., Is served with a constant period of time, depending on the number of plates per minute. The distance between the plates is always the same, depending on the number per minute.
Number of operators on the line - 1
The maximum speed of the conveyor - 1.0 - 11.0 m/min (// tractor-service.com)
The height of the receiving conveyor installation of packs and packaging - 720 mm
= The width of the conveyor of the installation of packs and packaging - 730 mm
The length of the roller conveyor of the establishment of packs and packaging - 610 mm
= Transporters' control - is placed on one panel with control of the machine for the formation of packs and packaging
= Nominal supply voltage - 220 V, AC with a frequency of 50 Hz. Voltage deviation within +/- 10%, from nominal value
Nominally consumer capacity of conveyors - 1,1kW
Number of plates in one package - 2 or 4 pcs
Compressed air pressure - up to 7 bar
Installation drive for packs and packaging - pneumatic
Consumption of the air air for the formation of packs and packaging - 130 l/min
Packaging Film thickness - up to 200 μm
Heating tool - nichrome string, with a diameter of 0.8 mm
The length of the weld - 1700 mm- 1pc, 1100 mm - 2pc
Підключення обладнання для формування пачок і упаковки - 220 Вт, 50 Гц
Consumed power of equipment for the formation of packs and packaging - 1.1 kW
The order of work of equipment:
The receiving conveyor has a pre -exposed height of the insulation plate, has a constant speed of movement of the tape, which is faster than the output of plates.
= The receiving conveyor receives the insulation plate and transports it to the roller drive conveyor. On the roller conveyor there is a reception board, with a arranged sensor, which, when approaching the plate, turns on the transverse chain drive together with the roller drive transporter 2, and displays the plate from the roller conveyor 2, to the roller conveyor 3.

Вмикання живлення здійснюється методом переключання перемикача, на боковій стороні електронної шафи - за часовою стрілкою.
The operating mode is switched on by switch switching, on the upper side of the electric cabinet - by time arrow.
= Installation of packs consists of a rolling conveyor for supplying plates by the principle of multi-storey and mechanism for feeding the formed packs under packaging in the film and further soldering.
= Installation of packs of packs consists of a frontal soldering node of PVC film, a node of moving a packet, in the form of a rolding, and the very node of movement, as well as special clamps of a pack, with subsequent soldering of the side sides of the package, a pre -straightened mechanism Moving traverses are installed a heating tool, in the form of a string. Management of the process of formation and packaging is carried out automatically, with the help of an electronic block.
На рухомих траверсах встановлений нагрівальний інструмент, у вигляді струни. Управління процесом формування та пакування здійснюється автоматично, за допомогою електронного блоку.
The control unit contains handles of power control power control - for each string.
= The block provides the possibility of functioning of each moving element of the pneumatic system (manual mode).

= Production period - 120 days.
Payment Terms: 70% subscription, 30% - after factory tests, before shipment.
= Cost - by agreement, depending on the technical characteristics of equipment.
Guarantee - 12 months.