Heat accumulators for heating systems 100, 200, 350, 500, 1000, 2000, 5000 liters, Kyiv

Check the price and availability. Heat accumulators are high-quality heat-insulated vertical steel containers with a hemispherical top and bottom designed for use in heating systems of cottages, houses, shopping centers, hotels and business centers. together with solid fuel boilers, electric boilers, alternative heating sources, heat pumps, solar collectors. The use of heat accumulators increases the efficiency of the heating system by 30%. Tank material - carbon steel, stainless steel. It is possible to equip with electric heaters, (using which, with the night tariff, we get up to 65% savings on building heating (the price is 0.36 kopecks for 1 kilowatt/hour, using heat accumulators for the night tariff together with air-water heat pumps, the price can be reduced to 0.12 kopecks for 1 kilowatt/hour) the price of heating a building of 120 meters will be 7 hryvnias per day or 210 hryvnias per month under the condition of high-quality insulation of the building), heat exchangers - coils, which allows you to simultaneously use hot water supply almost free of charge. More and more consumers are coming to the fact that the best option for use in heating and hot water heating systems is the joint use of a boiler or other non-constant energy source, with the mandatory use of a large heat-insulated water tank, which is included between the boiler or other energy source and the heating system wiring itself. Such a tank is usually called a heat accumulator or a buffer tank. The principle of operation of such a tank - heat accumulator is that the energy released by the heat generator is used to heat the additional volume of the heat carrier, which is located in a large volume and very well insulated container, and the analysis of this heat occurs as needed. The heat accumulator can simultaneously perform several functions: it allows you to easily connect different heat generators: solid fuelboiler, gas boiler, electric boiler, heat pump, etc. into a single system, matching them with the heating system; accumulates heat from the heat generator and gives it to the heating system as needed; protects the heating system from boiler overheating, because it absorbs all the overheated coolant, mixing it with a large supply of warm water; improves the operating temperature of the boiler, increasing its operating efficiency and reducing fuel consumption; increases operational comfort by increasing the periodicity of fuel loading and providing heating rooms with a relatively stable coolant temperature; if there is a built-in hot water tank or heat exchanger, the hot water supply system provides consumers with hot water. When you plan that a solid fuel boiler will be the main source of heat, then installing a heat accumulator is desirable and justified, and if several heat generators will be used at the same time, then installing a buffer is mandatory. This is the best way to coordinate heat generators of different types with different temperature characteristics: gas low-temperature or condensing boiler, electric boiler, solid fuel boiler, solar systems. The volume of the heat accumulator should be selected so that it can receive all the heat from the burning of the entire firewood of your boiler. According to various methods, the recommended volume of the tank can be from 20 to 50 liters per 1 kW of the power of the solid fuel boiler, the more powerful the boiler, the larger the volume of the tank. With the same boiler capacity, the volume of the buffercapacity will be larger where the volume of the heating system itself is smaller. It depends on the size of the pipes, radiators, etc. By installing automation to monitor the temperature indoors and outdoors, you can adjust the heat supply from the buffer to the heating system depending on whether people are at home or at work at a certain time or day of the week. Such programming will create even more economical consumption of heat carrier, as well as more comfortable living of people in the house. Why is such a heat tank - battery not yet in every residential building? The fact is that the price of a good heat storage tank often reaches the price of the installed boiler. Very often, whenselling a boiler, the seller's qualifications and knowledge are not enough to prove to the buyer the feasibility of using a heat accumulator for his heating system. Consultations by phone 067 - 466 - 26 - 03, (099) 452 - 41 - 03.