KMS corn harvester - 8 used, Kirovohrad region.

Corn harvester KMS - 8Harvester for harvesting of corn KMS-8 adapted for CASE combines, year of manufacture 2013, working condition. Provides harvesting of both upright and lying ripe corn with grain collection in the combine hopper, grinding and scattering of leaf stalk mass on the field. HarvestersKMS-8 have the following advantages: - with the help of special removable spacers, harvesters can be easily and quickly aggregated with all domestic and foreign grain harvesters - for operational re-aggregation, reinforced upper hooks-catchers, located on the spacer, lift and reliably hold the harvester by the upper round pipe of its frame. From below, with the help of two bolts hinged on the backbone beam of the frame, the harvester is rigidly attracted to the frame of the spacer; - reinforced elements for hanging the harvester on the harvester, installed automatic drive tensioning devices, as well as new belts and chains of increased traction capacity, installed metal products of a higher strength class; - on KMS-8 harvesters, the structure of the channel with intermittent rollers and stalk conveyors is reinforced; - supports (front two-hinged, with rigid fixation of hinges and rear spherical self-adjusting) provide the possibility of high-performance work of the harvester; - to increase the technical and technological reliability of the harvester on the left and right channels, the safety clutches and the glasses of the transfer boxes, in which the support ball bearings of the input shafts are installed; - the front supports of the rollers have been strengthened, which are rigidly fixed on the sidewalls of the channel frame and allow stepless adjustment of the distance at the entrance to the intermittent rollers; - for harvesting high-yielding hybrids of corn, the reinforced design of the cob auger. Blades are installed in the central part of the auger for transporting cobs into the inclined chamber of the harvester. A reinforced safety clutch is installed on the auger drive shaft. Lattice windows are installed on the wind shield for visual control of the driver behind the auger of the harvester Grip width, m - 6.0 Mass, kg 2940 Working speed, km/h 5-10 Overall dimensions, m (length/width/height) - 3.00/5.77/1.25