Forklift TCM for 3 tons on large 15 pneumatic wheels, with a separate positioner, Cherkassy region.

Forklift truck TCM for 3 tons on big 15wheels pneumo, with a separate positioner for each villa. Model FHGE30T5. Operating hours 12,542 hours. Year of manufacture 2016. Nominal load capacity 3 tons. The maximum height of cargo lifting is 3 meters. The two-section mast (duplex) does not lose its load capacity at the lifting height. Gas-petrol engine with factory gas equipment, thanks to which the loader can be started immediately on gas without warming up the system on gasoline in the warm season. The gearbox is reliable and common nowadays - hydromechanics (automatic with a torque converter). It is equipped with a modern economical Nissan K25 injection engine. 4-cylinder, with a working volume of 2.5 liters and a capacity of 54 liters. which is famous for its reliability and unpretentiousness and is installed on trucks without special changes to this day and, most importantly, is repairable. A separate positioner is installed for each fork (it allows you to hydraulically move the forks closer or further from each other, this is useful when it is necessary to process pallets of different sizes).Wheels 15 diameter (pneumatic) on the driving axle, which improves the patency of the truck and increases its clearance. Hydraulic control is carried out by a simple and time-tested system - levers. It is equipped with a special patented Nissan single-lever system that allows you to simultaneously take the pallet on yourself and lift it up.