Mounting foam professional Rhinoceros 850 g, Kyiv

One-component polyurethane mounting foam in an aerosol can for use with a special gun. Has high adhesion to most building materials: brick, concrete, plaster, wood, metal, etc. In the hardened state, it is resistant to aging processes, exposure to heat, moisture, mold, fungi, and insects. Requires protection from UV radiation.

Purpose: used for filling cavities and cracks, sealing and sealing seams and cracks, insulation of building structures, connection of various materials.
Universal heat and sound insulator, fixing material during installation and for sealing window frames and wall panels, piping and cable systems, heat and sound insulation systems.

For high-quality maximum foam output, the cylinder should be kept at a temperature from 18°C to + 30°C for at least 24 hours and thoroughly mixed (at least 1 minute) immediately before use. Clean the work surface from dirt, grease and moisten it. The surface must be covered with frost or ice. During operation, keep the balloon upside down! A space more than 4 cm deep and more than 6 cm wide should be filled in layers. Each subsequent layer is applied after hardening to the mold of the previous one and moistened separately. It is recommended to fill the working space by 2/3 of the volume. After complete hardening, remove the excess foam mechanically, and protect the ball from sunlight. After finishing work, clean the gun of foam. Fresh foam is recommended to be removed with a foam cleaner.

Technical characteristics:
foam output: up to 65 liters
temperature resistance: -60°C to +100°C.(//tractor-service.com)
Temperature range of use:
-10 ° C to + 30 ° C (optimally + 20 ° C)
Curing time (under normal conditions):
for casting: 15-20 min.
complete hardening: 12-24 hours.

Safety measures: Flammable! Keep out of the reach of children. In case of contact with eyes, rinse immediately with running water and consult a doctor.

Storage: in a vertical position, with the valve up at a temperature from +5°C to +30°C in a dry place, in the factory packaging no closer than 1.5 meters from the source of fire and heating devices. Do not heat above 50 ° C.
Warranty period of storage: 12 months from the date of production.