Nissan forklift 3 tons, with a separate positioner for each fork, Rivne region.

ForkliftNissan loader 3 tons, with a separate positioner for each fork. Model UG1F2A30D.
The nominal carrying capacity is 3 tons. The maximum lifting height of the cargo is 3 meters. The mast is two-section (duplex), which does not lose its load capacity at the lifting height. The gas-gasoline engine, with factory gas equipment, thanks to which the forklift can be started immediately on gas in the warm season, without warming up the system on gasoline. The gearbox is reliable and the most common at this time is hydromechanics (automatic with torque converter). Equipped with a modern economical Nissan K25 injection engine. 4-cylinder, with a working volume of 2.5 liters and a capacity of 54 hp. which is famous for its reliability and unpretentiousness and is installed on forklifts without any major changes to this day and, most importantly, is repairable. A separate positioner is installed for each fork (allows you to hydraulically move the forks closer together or further apart, this is useful if you need to handle pallets of different sizes). It is equipped with a special patented Nissan single-lever system that allows you to take the pallet on yourself and lift it up at the same time.Wheels 15 diameter on the driving axle, which improves the passability of the truck and increases its clearance.