Reamer for drums Claas Lexion, John Deere, Case, New Holland, Rivne region.

We provideservices major and partial repair of the drum:
- boring of the drum;
- restoration of geometry (elimination of bending of slats in the horizontal and vertical planes; elimination of deflections, breaks, defects of rods; elimination of deformation of the guide plate, straightening of the frame on the press);
- welding on a conductor;
- hammering reinforced wire;
- production and replacement of worn slats according to the height and rounding of their working faces (steel 09G2S);
- if necessary, manufacture of new parts (frame, etc.)
An individual approach to each client (the possibility of changing the size of the cell, the width of the slats, the diameter of the wire and other parameters on request)
podbarabania.com.ua
(//tractor-service.com)
We also provide services for repair and restoration of parts:
– camshafts (spraying of worn cams and necks followed by grinding to repair size). We have an exchange stock of camshafts R522884 engine John DEERE 9.0L
– splined joints of shafts and teeth of gears and sprockets
- bearing seats on the shafts of augers, shredders, beaters and other parts of agricultural machinery
- variators, pulleys (restoration of keyways, seats
- sieves, lattice looms, rumblers, straw shaker keys (we replace the comb over the entire area of separation and seals, restore or completely replace the frame, repair the adjustment mechanism)
- threshing drums, rotors, beaters, shredders, impellers
– screws (turns, spline joints, alignment of the main shaft of any thickness and size)

We carry out dynamic balancing of screws, drums, rotors, impellers, pulleys, etc. details up to 12 meters.
agro-anc.com.ua