Separator stall for untethered maintenance MetallDreamUA, Kyiv

STALL DIVIDER 1-ROW 1RSO

Stall equipment partitions. Features of the design make it possible to mount it on a vertical rack.

STALL SEPARATOR 1-ROW 2RSO

Stall equipment partitions. Features of the design allow for mounting on a horizontal crossbar.

STALL SEPARATOR 2-ROW 1RSD

Stall equipment partitions. Features of the design allow mounting on a vertical rack.

STALL SEPARATOR 2-ROW 2RSD

Stall equipment partitions. Features of the design allow for mounting on a horizontal crossbar.

FENCE OF AFT TABLE

The approach to the feed table is limited by a grate. The size of its cells depends on the age of the animals. The rods can be located straight or diagonally.
Fences allow cows to easily access feed and farm staff to monitor and minimize feed loss. There are different versions of the stern table fences: adjustable beam, diagonal stern bars and headlocks. In order to regulate the movements of animals in the cowshed, wickets, gates, and fences of cattle runs play an important role. and the strength of the structure.

ADJUSTABLE BEAM (Shock bar for cattle)

The simplest fence of the feed table is an overhead limiter in the form of a round steel pipe fixed on racks at a certain height from the surface on which the animals stand. To prevent the animals from rubbing the withers against the beam during feeding, it is extended towards the feed table, for which auxiliary brackets are used, or a special curved configuration of the beam.
(//tractor-service.com)
HADLOCK

One of the most functional types of feed table fencing is a "headlock" animal fixation grid. These panels, in addition to preventing animals from entering the feed table, and organizing animals along the feed table, can hold them for various veterinary activities. They have a special mechanism that fixes the animal's head.

- It consists of a feed grid, a rack and fasteners.
- Thickness of zinc coating - 80-120 microns;
- The width of the opening is adjustable. The frame is made of a pipe with a diameter of 60.3 mm. The ends of the section are attached to adjustable tips.

Main advantages

The zinc coating is applied after all technological operations for the production of the feed grid, which prevents the possibility of its mechanical damage during the production process and extends its service life.
Group and individual fixation of the animal is possible.

The headlock opens in two directions, the section is raised and easily dismantled. The "safe" position allows you to release the animal, even if it suddenly falls. Reinforced balancers are equipped with a part to block the passage in any of the positions. Blocking the passage preventscalves, who are with their mothers, from putting their heads under the balancer. A high level of comfort is provided for the animal's neck.

The balancer pivot joint, equipped with a 58mm unthreaded steel sleeve, prevents the lever from flattening. Thanks to the elastomer system, there is no metal-to-metal contact and the return of the balancer to position 1 (open) is carried out silently.
The neck opening is adjusted by means of a tube with a coupling clamp, reinforced with flanges, which has oval corners. Fixation on the movable lever is reliable, out of reach of animals, carried out gently and quietly. Thanks to a special stop made of composite material, fixation is carried out on each support of the monolithic movable lever, which also has a hole for individual locking. The latch can be safely removed both from the right and from the left side. The control handle of the movable lever allows you to maneuver several sections.

DIAGONAL GRATES

The fence of the feed table with diagonal feed grates is used for young animals and cattle. If their fixation is not required, then diagonal feed grates or Z-shaped feed grates are used. They are easy to install and reliably prevent animals from entering the feed table, reduce scattering and loss of feed. The same type of solution can be used in the cowshed. The size of the diagonal cells varies depending on the age groups of cattle.

GATES AND FENCES FOR CATTLE

wickets They should be strong, but not injure livestock. It is necessary that the closed or open position of the gate is fixed simply and reliably. They are made so that people can easily open them, but animals would not be able to open the gate.
Important elements of the equipment of cattle farms, which ensure the movement of animals from the section to the milking hall and back, to the pasture, walks, are fences of cattle runs, gates and gates. They must be strong enough to withstand the pressure exerted on them bycows weighing 600-700 kg 600-700 kg, prevent mixing of technological groups and avoid injuring animals during the race.