Жниварка соняшникова
Sunfloro Optimo-9.2 робоча ширина якої 9.2 метра. Жниварка соняшникова
Sunfloro Optimo-9.2 To collect sunflower a continuous slice with an additional stretch shaft, due to which the harvest has a higher performance. Due to the width and inter-height distances of the stem lifts, sunflower harvesting is carried out in any direction with any row spacing. Ball tips on the trays exclude strokes on the sunflower stem and minimize the shaking of the plant.
Harvesting Sunflower Sanfloro Optima-9.2 guarantees a clean harvest, due to the cut of all sunflower baskets almost without leaf-stem. The special design of the harvest has a low weight, which reduces the cost
combine fuel=, as well as increases the strength of the harvest. The use of simplified and very effective drive units and a cutting system minimizes the wear of the parts and reduces the time for maintenance.
=
Advantages
• stretching shaft that is a visitor to the entire third -party leaf mass.
• A wide range of regulation that allows you to harvest sunflower of any varieties and any yield.
• Easy dismantling of work elements drive.
• Light weight of harvest.
• Легка вага жниварки.
• new location of the auger drive and the rod in the right side of the harvest extends the life and reduces the load.
=
• Trap for raw materials collected, which eliminates the ejection of seeds and sunflower hats back.
(// tractor-service.com)
Optimo 9.2
Productivity (ha/h) at a speed of 8 km/h 7.4
Recommended harvesting speed (km/h) up to 8
Ширина ліфтера (мм) 176
Довжина лотка (мм) 1390
The gap between the trays (mm) is adjustable 25-60
Відстань по осях лотків (мм) 229
Число подвійних ходів ріжучого апарату (в хв.) 640...850
The number of turnover of the rod (in min.) 55… 67
The number of revolutions of the auger (in min.) 170 ... 190
The mass of harvesting without the frame of the hanging (kg) 2695
Габарити (ширина, довжина, висота в мм) 9490x2260х1195