NEW STRALA mower Geo AM100 100cm embankment mower mulcher mower NOVA, Kyiv

Slope mower Geo AM100

100 cm working width (alternatively 80 cm)

including Y-knife

(optionally also available with 120 cm, 150 cm or 180 cm hedge shears)

An ideal bulkhead mower for small tractors, especially suitable for mowing and mulching embankments or ditches, forest edges, paddocks, undergrowth or side shifting behind the tractor.

This mulcher has its own hydraulic oil tank, so only the GDP connection is required to operate this mulcher.

The power take-off of the tractor drives thehydraulic pump on the mulcher, thanks to which the different working positions of the mulching head can be adjusted.

The angle of inclination and lateral shift are adjusted hydraulically separately.

The mulcher is controlled by a control valve with several levers that can be attached to a suitable place in or on the tractor.

Hinging is carried out on the rear three-point drive of a Cat.1 tractor with a rotation frequency of GDP 540 rpm.

The mulcher is equipped with pendulum-suspended Y-shaped blades, which are distributed offset on the flail shaft.

Knives ensure a clean cut of meadow. In addition, even smaller branches can be mulched without problems.

The height-adjustable support roller at the back of the mulcher and the height-adjustable guides ensure the adjustment of the cutting height.

The pinion shaft and drive roller run in lubricated bearings that are easily accessible from the outside.

All swing arms and swing bolts are also equipped with grease nipples so they can be lubricated very easily.

There is a flap in the front of the mulcher to ensure that no objects such as stones or mulch can escape from the mulching body.(//tractor-service.com)

The body for mulching is made of 4 mm thick steel, the suspension is 6 mm thick.

Due to their low weight, thesemulchers are especially|192 підходять для невеликих і компактних тракторів від 25 к.с.

Technical characteristics:

- Working width of the mulching head: 100 cm

- Boom height max. 350 cm

- Lateral displacement in the upper position: 150 cm from the middle of the cardan shaft

- Lateral displacement in the lower position: 270 cm from the center of the cardan shaft

- Knives: 30 pcs. Y-knives

- Thickness of the casing material for mulching: 5 cm

- Material thickness of 3-point attachment: 6cm

- Roller diameter: 10 cm

- Shank diameter: 11 cm

- Hydraulic oil: 65 l

- Weight: 290 kg

- Power requirements: from 25 hp

The mulcher is delivered fully assembled, with all oils and grease.