Repair and restoration of AKGSM "Mriya" fodder processor, Nikolaevskaya region.

Many households engaged in animal feed animals use feed processors (KP) "Mriya" of various modifications.
During the operation of the KP, the mechanism wears out. First of all, millstone hydromills (GM), which are subject to abrasive and cavitation wear. At present, millstones have become a deficit, and the established process of fattening in farms is on the verge of failure.

Voka state of emergency offers a way out of this situation - replacing GM "Dream" with GM "Appetite"!

As practice shows, in many farms, in KP "Mriya" crushed grain is poured and heated, warm water is poured, otherwise it turns out - cold water is poured, cold porridge is poured. These actions improve the quality of porridge, speed up the process of its preparation, relieve the load on the mill, but also make them essentially unnecessary - the grain is already ground, and the water is warm.

With crushed, prepared grain, the knife activator GM "Appetite" works much more effectively, and the cavitation moment is much higher than GM "Mriya". That. all processes - hydrolysisstarch, saccharification, heating... happen faster.(//tractor-service.com)
Experimenters - moonshiners, on the "Appetite" unit brought the water temperature to 92 degrees.

I.e. GM "Appetite", in addition to the preparation of fodder porridge, can be used for heating rooms, heating oil, fuel oil, petroleum products..., production offertilized, sauces. Where it is not possible to use ordinary heating shades. Wherever ideal mixing is required, pumping of liquid solutions with accompanying grinding.

For example, about 3,000 steers are fattened on a farm near Kyiv. The problems that arose were solved.

-- Sergey, Kyiv region. AKGSM "Mriya" - 01A was used for fattening steers. The unit is constantly in operation, wear of the mechanism, millstone 100%! They replaced the standard hydromill with GM "Appetite" - the problem is solved! The engine, frame, capacity were left,although the capacity should also be changed - it is rusting. . .
Three months later, the second "Mriya" - 01A - was restored. Standard engine 15 kW/1500 rpm. it works together with GM "Appetite", but instead of 18 knives, as in the first one, 24 knives are installed in the activator of the second one, which increased the efficiency and efficiency of the installation.
8 months have passed - at the first installation, the inspection showed that the worn activator needs to be replaced. And this is understandable - 6 batches of 500 liters of water are produced per day. 6х500х8х30=720000l or 720 tons! A new activator was installed, the body was restored - work is ongoing.