Зарегистрироваться
UKR rus
 
As a result of the attack, the data center with the site's servers was damaged. The website was restored on a temporary site, the data was not affected. Work continues, disruptions are possible. Sorry for any inconvenience.
 / ... / ... / ... / Spare parts for loaders
Sell / buy
Domkrat diesel engine DET 40, DET30 Jack installation UDS-160 in Odessa/Nikolaev et al., Odessa region.
For sale / buy

Domkrat teplovoznyy DET 40, DET30 UDS-160 jack installation in Odessa/Nikolaev et al., Odesskaya region.

Region:all of Ukraine, Odessa region. (Odessa)
Updated:
Domkrat teplovoznyy DET 40, DET30 Jack installation UDS-160

Viber Watsap for foreign countries

+380501031063
[email protected]

The DT-40 locomotive jack with electric control is intended for lifting diesel locomotives, electric locomotives, passenger and freight cars,railway tanks all types during repair and maintenance of rolling stock, when replacing trolleys at transfer points. The jacks are delivered as a set of 4 jack stands with a total load capacity of 160 tons with common and individual control panels.

Diesel locomotive jacks DT-30, DT-40

The DT-30 locomotive jack is intended for lifting passenger and freight cars, railwaycisterns of all types types, shunting diesel locomotives during repair and maintenance with a weight of the lifted part not exceeding 120 tons.
The DT-40 locomotive jack with electric control is intended for lifting all types of diesel locomotives, electric locomotives, passenger and freight cars, refrigerator cars, railway tanks when replacing trolleys at switching points and repairing rolling stock.
The jacks are delivered as a set of 4 jack stands with a common control cabinet ESKG-92.001.09 and individual control panels.

Main characteristics of jacks DT-30 and DT-40:
• design: screw-type with a rectangular thread on the screw and a bronze nut at the minimum and maximum height of the limb lift with optimal distribution of the load on the support nuts;
• mobile jack – no fastening to the foundation is required;
• the design of the jack provides the possibility of self-installation of the screw in a vertical position, which increases reliability and load capacity;
• the electromechanical design of the lifting mechanism is simple and reliable in operation;
• to increase the reliability of load control in the design of the modified control cabinet ESKG-92.001.09, microcontrollers are used;
• a color indication of the current state of the jacks is provided;
• the possibility of both joint and separate operation of jack racks with control of any jack from the control cabinet;
• possibility of emergency stop of jacks with individual control panels;
• automatic cut-off of the power supply of the jacks upon reaching the set limits;
• the degree of protection of the control cabinet meets the requirements of IP56 according to GOST 14254-96.
(//tractor-service.com)
Parameters DT-30 DT-40
Lifting capacity of the jack stand, t 30 40
Load capacity of the jacking installation of 4 jacks, t 120 160
The extension of the retractable trunk from the axis of the cargo screw, mm: 178
-максимальный:
-minimum:
730
370
730
370
Possible lifting height, mm 850-1900 880-2600
Speed of lifting (lowering), m/min. 0.17-0.20 0.17-0.20
Time of full lifting (lowering), min 5.5-6.3 8.7-9.5
Installed engine power, kW 5.5(7.5) 7.5
Jack mass, kg 1700 2050
Dimensions, mm: 190
Длина
Width
Height
1340
1300
2670
1440
1300
3440

Delivery to any region of Ukraine, the Baltic countries, the former CIS, Europe and the World. activities
 
Магазин, контакты
Иван /  отзывы, инфо. /  оценка активности
Phone: +380xxxxxx show
Prepayment or super bargain price? Be sure to familiarize yourself!
Additionally
Ad ID: #1205041 (added by a registered user, registration date: 01-06-2016)
Добавлено / Обновлено: 27-09-2026 08:55  (current, until: 09-27-2027)
Permanent ad address:
Showed / watched for today: ?, total: ?
 
Similar ads
Among them there are many interesting ones...
ru
/ru/
0