= combine Deutz-Fahr C 7206 (2022), Kyiv region

= Mololatile Baraban
Молотильнийбарабан (діаметр / ширина), мм 600 / 1520
Number of Budychiv, pcs 8
Electrical regulation of the speed of the response / waves 420 /1250
Понижуючийредуктор (ОПЦІЯ) об / хвил 210 / 625
Conclusion
Number of planes, pcs 15
Girth angle, degrees 121
The area, M2 1,13
Multicigmented (option)
Osteodoodil plastic *
Electric -regulating gap at the input and output *
Performing Corn Collection (option)
Виконанняпідбарабання для збору рису (ОПЦІЯ)
ТУРБОСЕПАРАТОР
Diameter, mm 590
Speech -turns, sight / waves 775/410
Flat -gun, M2 0,97
Electrical regulation from the cabin (5 provisions) *
СОЛОМОТРЯС
Number of cavish, pc 6
Quantity, pcs 4
Plane solomotryas, m2 6.7
Total plane 8.8
System cleaning
Total area, M2 6.32
Blade fan, pc 44 blades
Multi -directional scene *
Turbouer *
Reserves pre -cleaning *
Systemadolot
Independent Two -Dairy Device *
Grain Bunner
Capacity, L 9500
Driving speed, l / sec 90
Straw producer
Number of notes, pc 60
Engine
Model Deutz TCD 2013 L067, 2l
Ecological standard Euro-3
Deutz Commonrail (DCR), Pressure Pressure, Bar 1600
= Maximum (ECE R120), kW / c. 269/366
Tank capacity, l 750
Transmission
Hydrostatic type
Number of programs 4
Speed ​​Movement Ahead / Back, km / h 0-25 / 0-14
Systematic on the slopes 'balance'
Various and longitudinal slope 20% / 6%
Overalls and weight
Wheel base, mm 3890
Length of the Begling, mm 9240
High -loading auger, mm 4560
The height of the baluner, mm 3990
Вага безжатки, кг 17000
Elegant design and fresh look. The new C7000 series boasts a modern design, created by Judzharo, which expresses the technological advantage of the Deutz-Fahr-guarantee brand excellent productivity of threshing and excellent quality of grain and straw based on more than 100 years of experience and constant development of harvesting systems. C7000 is not afraid of difficult conditions and provides excellent productivity and quality of threshing in all conditions. The C7000 series is equipped with Deutz V engines that have exceptional field performance with one of the lowest fuel consumption in this class, which was made possible by EGR, SCR technology with Adblue® and DPF. All these characteristics together make grain harvesting combines Series C7000 Ideal for any possible operating conditions. The Commander Cab V cabin with excellent inspection, the last generation's working lighting and exceptional comfort highlights the last complement to Deutz-Fahr from the total mass. To achieve unsurpassed productivity and reliability, as well as the best cleaning results, each aspect of the new C7000 series is designed to ensure the maximum quality of grain, straw and productivity.

Deutz-Fahr has developed a modern threshing system for a new C7000 family, which set new standards for this class. This durable, reliable and extremely productive system carefully processes the product throughout the process of grain separation.
Results-body quality cleaning.
In addition, since most of the process of separation of grain is already in concave, it reduces the load on straw, increasing productivity, and also provides careful handling of straw itself.

= Hamotile drum

A wide threshing drum with a diameter of 600 mm has a width of 1.52 m for 6 models of straw The drum is equipped with eight straps (on screws for fast and easy replacement) for perfect threshing.
Барабан оснащений вісьмома планками (на гвинтах для швидкої і легкої заміни) для ідеального обмолоту. (// tractor-service.com)
Дія елеваторного каналу в поєднанні з конфігурацією системи обмолоту забезпечує подачу продукту на молотильний барабан рівномірним потоком і без забивання.
Hole above the feed channel simplifies maintenance.

Multi -segmental conquering

Додатковий внесок в універсальність C7000-це опціональні багатосегментні підбарабання (діаметр дроту 4 мм), спеціально розроблена для негайної зміни конфігурації зернозбирального комбайна при необхідності для різних культур: сегменти підбарабання просто видаляються через отвір каменеуловлювача і замінюються з певними сегментами для наступного врожаю.
Підбарабання оснащене п'ятнадцятьма планками рашпіля, розташованими під кутом 121 °, для чудової ефективності обмолоту і сепарації.
= The distance between the conquering and the threshing drum front and the back is regulated independently from each other by means of electric motors controlled by the Commander Control. For the particularly difficult to threshed crops, a set of installed hand -installed plates to remove the canopy.

Редуктор барабана молотарки

The threshing drum is equipped with a strong transmission with an electronically adjustable speed in the range from 420 to 1250 rpm, which allows the operator to choose the perfect speed for each crop.
And the system of automatic transmission with adjustable speed protects the straps and a threshing drum from overload.
For particularly delicate crops, an additional gearbox is available, which is easily installed on the flange part of the threshing drum. This unit lowers the working speed from standard range 420 - 1250 rpm to the range 210-625 rpm

Турбо-сепаратор

The C7200 TS models are equipped with a 600 mm in diameter with ten gear rash strips, which increases productivity to 20%. The system uses a centrifugal force and an additional mesh (in a 40 mm step), which increases the area of ​​= surface of the combine= 0.81 m2 for 5 variants of straw or 0.97 m2 for 6 variants of straw, to provide optimal grain separation. The turbosisard can be electrically installed in five different positions (for the drum move from 25 to 65 mm) and operate at two speeds: 775 rpm for crops with smaller seeds and 410 rpm for crops with heavier seeds.
Турбосепаратор може бути електрично встановлений в п'ять різних положень (для ходу барабана від 25 до 65 мм) і працювати на двох швидкостях: 775 об / хв для культур з більш дрібним насінням і 410 об / хв для культур з більш важкими насінням.

=. Straw

Large surface area, length and stroke of strawers provide effective separation of the last grain from straw,
= Additional Contribution to the Versatility of C7000 is Option Multi-Segmental Digging (4 MM Wire Diameter), Special Designed for Immediate Change The Conquer Is Equipped With Fifen Rats of Rashpil, Arranged at and Angle of 121 °, for Excellent Efficiency of Thresing and Separation.
= The first degree of straw (4 in C7206 and 5 models in C7205 models) is deeper to slow down the flow of the crop emanating from the threshing system and to increase the efficiency of the first degree of separation.
The system is mounted on special, tight, unsuccessful bearings that reduce noise and power loss, as well as increase the life of the shaft and the straw themselves. = 'Box-Sizing: Inherit; '> And for even greater efficiency of separation strawmothers can be equipped with special combs, and the rotary tray has a special shape, so the crop already reaches the bowl for preparation of grain in stratified form.

== Reductor of the Thrasher Drum
Sita covers an extremely large area, and the turbine works with a two -stage system for effective cleaning of a huge amount of product.

= Turbine

High -performance (400 mm diameter) turbine with 44 shovels absorbs air over the entire width of the combine. The turbine speed is regulated electrically in the range from 480 to 980 rpm
= The volume of the cross air flow is regulated by deflectors that accelerate or slow down the supply of air to a sieve. The air is evenly distributed over the entire length of the tank. The volume of transverse air flow is regulated by deflectors that accelerate or slow down the supply of air to the grid for uniform supply along the entire length of the tank.

DGR

As the name implies, the DGR system (double return of grain) consists of two separate systems of grain recovery, one on each side of the combine.
= The Deutz-Fahr Recuoperation System redistributes the material on the grain preparation. This solution prevents the risk of overloading the threshing system, ensuring uninterrupted operation in the field and preventing the loss of product from straw.
= DGR uses friction inserts (interchangeable for different crops) that additionally threshed the restored grain.
= The recovery rate is controlled continuously, and the emergency signal warns about the conditions of overload.
The CCM module includes a recovery monitoring function that additionally increases machine performance.

= Unloading

The bandwidth of 90 l / sec. Provides rapid emptying of the tank, and the speed of unloading is regulated by means of special deflectors in the tank next to the unloading auger.

= Shredder

The integrated straw shredder is equipped with a rotor with 48 blades, located in 4 rows on 5 models of straw or 60 blades on 6 models of straw. Blades have toothed and curved shapes.
This configuration creates an air flux that distributes the material evenly over the surface of the cutting tables, and can be adjusted by means of manual control deflectors (electrical control system is available as an option).
= The system can be configured for grinding straw or corn simply by replacing two pulleys, without the need for additional reducers for threshing more heavy crops.
The oncoming knife position is regulated to obtain the required degree of grinding.

Engine

The engine of the combine harvester should not only be powerful enough to meet the characteristics and functional requirements for the machine itself, but also for the operation of additional equipment and additional gadgets, such as== straw shredders, ріжучі головки для кукурудзи, ножиці для стебел і т. д.
Він також повинен забезпечувати достатній запас крутного моменту для забезпечення надійної роботи навіть у важких умовах без втрати швидкості системи обмолоту.
= New C7000 Models reach an unprecedented performance level with minimal impact on the environment.
= The 7.7-liter Mercedes-Benz OM936 engine develops a power up to 353 hp.

= By putting every ounce of force into work

The power is removed from both ends of the crankshaft, which allows to separate hydraulic and mechanical functions and provides a live transmission without loss of power.
This is so