Combustion chamber for heater Airtronic D2 Eberspacher 252069100100, Kyiv

Combustion chamber for Airtronic D2 Eberspacher heater
Catalog number 252069100100
Complete with glow plug grid
An analogue of the original Eberspacher spare part. Made in China.
The combustion chamber is used:
252116050000 D2 24v
252069050000 D2 12v

Replacing the combustion chamber.

Dismantling.

1. Dismantle the heater.
2. Disassemble the case.
3. Remove the control unit.
4. Remove the overheating sensor.
5. Remove the supercharger.
6. Remove the plate.
7. Pull out the heat pipe and gasket from the heat exchanger. The seal must be replaced.
8. Carry out work on removed components.(//tractor-service.com)

Montage.

1. Install a new seal in the heat exchanger and bring the heat pipe to the set position.
2. Install the glow plug.
3. Install the combustion chamber in the heat exchanger.
4. Fasten the combustion chamber and the pressure bar with screws.
5. Tighten the screws with 6±0.6 nM.
6. Install the supercharger.
7. Install the control unit.
8. Install the overheating sensor.
9. Install heat-insulating spacers.
10. Assemble the case.
11. Install the heater.

Other spare parts for the Airtronic D2 Eberspacher are available - see our website or call for details.
There are also Planar, Webesto, Eberspeicher and Chinese-made autonomous heaters.

Also Airtronic D2 Eberspacher combustion chamber is searched as:

Combustion chamber for heater Airtronic D2 Eberspacher, Combustion chamber Airtronic D2, 25 2069 1001 00, 252069100100, Combustion chamber Airtronic D2 analog, 252069100100 analog, burner combustion chamber Eberspacher airtronic d2 analog, Eberspacher airtronic d2 spare parts, eberspacher airtronic d2 repair, combustion chamber for air autonomous heater eberspacher airtronic D2, combustion chamber Eberspacher Airtronic D2, Spare parts for air heaters Airtronic, Spare parts for air heaters Airtronic D2, Spare parts Eberspacher, Airtronic D2 ANALOG 252069100100