Pryskyvatel hinged Jar-Met 600/800/1000 Rod 14-16m, Dnipropetrovsk region.

Spring sprayer Jar-Met 600/800/1000 Rod 14-16m (floating mechanism) Poland in Dnipro is available today - call and order - delivery today!!! 066-78-80-139

"Jar-Met" mounted tractor sprayers, made in Poland, are intended for agricultural work on the protection and treatment of plants with liquid fertilizers on field plantations. 066-78-80-139

Construction
The tank for the solution, installed in a closed frame with spreader bars holding reinforced hoses, with connected nozzles, coming from the distributor with a high-precision glycerin pressure gauge. Liquids are supplied by thepump, which is activated from the power take-off shaft. It has a four-stage filtration system.
066-78-80-139
They are aggregated with tractors from 15 to 50 hp, depending on the volume of the tank.

Tank/Frame
A dense polyethylene tank with chemical-shock-protective properties, installed in a welded frame made of durable alloy with reinforced construction and powder coating. Filtering sieve at the tank neck.

Pump (//tractor-service.com)
These sprinklers are equipped with high-quality plastic-cast-iron pumps of the "Tolveri" company of the membrane-piston type, capable of driving liquid through itself up to 120 liters per minute. It withstands any solutions, from mild fertilizers to aggressive insecticides. Easy to maintain and reliable.
066-78-80-139
Bars
A profiled pipe, 2 mm thick, with powder coating and an installed manual winch for adjusting the treatment for different plant heights. It is possible to install a floating mechanism that aligns the wings to perform work on uneven surfaces. The length of the rods is from 6 to 16 meters, sprayers of any volume can be equipped up to the maximum possible length of the rods in 600/800/100 Rod 14-16m
066-78-80-139

Nozzles
Single, with a side cutout (cock), flat-jet type of spraying. It is possible to equip with three-position nozzles to improve the quality of spraying. Slotted sprayers, with the possibility of replacing them with injector ones, for additional mixing with air, used for certain types of solutions and facilitating spraying in windy weather.
066-78-80-139

Filtration
Four-stage filtration begins with the thinning sieve at the tank neck, then in the filter of the suction pump, then on the filter of the distributor and finally on the filters of the nozzles.

(More details from the manager) 066-78-80-139 Delivery today by phone