I will sell fittings from the manufacturer, Kharkiv region.

Commercial offer from the manufacturer's firm. Glass-plastic reinforcement "AUKSO Composite" is designed to replace metal when reinforcing construction structures.

My phone numbers are +380969351156 Viber and +380502711484 WhatsApp Aleksandr
Email[email protected]
The glass fittings are natural, 4 mm.

Glass-plastic reinforcement "AUKSO Composite" is designed to replace metal when reinforcing construction structures.
Glass plastic fittings AUKSO Composite — the most popular areas of application:
1) When building storage facilities at chemical plants
2) During the construction of melioration, drainage, sewerage, and canal systems
3) During the construction of fountains
4) When making railway track sleepers, line power transmission supports
Areas in which glass and plastic fittings are not recommended for use due to lack of research:
1) In the columns of the load-bearing structures of bridges.
2) In monolithic wall structures higher than 3 floors.
3) Stair marches
4) The plate is covered with a length of more than 4 meters (without pre-tension)
ADDITIONAL ADVANTAGES OF GLASS PLASTIC FITTINGS:
1) Radio transparency.
2) Low thermal conductivity. Glass, plastic fittings do not form "cold bridges" in the cold season, as metal ones do.
3) High corrosion resistance, strength and durability. Glass reinforcement greatly prolongs the life of concrete structures for the construction of which it is used.
Thus, without exaggeration, glass fittings can be called one of the most promising modern construction materials. Thanks to the low price, glass and plastic fittings gradually conquer the market.

Comparative table

Metal fittings
Glass plastic fittings
Diameter 6 A-III
Diameter 4 SAC
Diameter 10 A-III
Diameter 6 CAC
Diameter 12 A-III
Diameter of 8 SAC
Diameter 14 A-III
Diameter 10 SAC
Diameter 16 A-III
Diameter 12 SAC
Diameter 18 A-III
Diameter 14 SAC

Metal fittings
Glass plastic fittings
Diameter 6 A-III
Diameter 4 SAC
Diameter 10 A-III
Diameter 6 CAC
Diameter 12 A-III
Diameter 8 CAC
Diameter 14 A-III
Diameter 10 SAC
Diameter 16 A-III
Diameter 12 SAC
Diameter 18 A-III
Diameter 14 SAC
AUKSO Composite
Glass plastic fittings

Plastic glass
fittings

Tsvetnaya
glass fittings

Basaltovaya
glass fittings

Fiberglass fittings
with quartz sand
Application of composite armature
CONSTRUCTION (FOUNDATION)
The choice of composite reinforcement for foundation reinforcement is due to its advantages over metal:
- Low price of fittings made of fiberglass;
- Savings on transportation due to the light weight of fiberglass andpackaging in rolls;
- Composite reinforcement is supplied in rolls of 50 and 100 meters, which allows you to easily cut bars of the required length;
- Absence of cracks in the foundation due to the difference in coefficients of thermal expansion of concrete and metal (they are the same for fiberglass and concrete)

ROAD CONSTRUCTION
Composite reinforcement instead of steel reinforcing mesh in the road surface improves operational characteristics and reduces the cost of materials for the construction of roads, and the problems of the appearance of pits, potholes and displaced soil go away. Because when the coating is stretched, the strength becomes much higher, and the horizontal load is distributed over a large surface area. A three-fold increase in the service life of the asphalt coating provides significant economic interest to large construction companies.

CONSTRUCTION OF AIRPORTS AND RUNWAYS
Large airplanes, such as Boeing, are constantly getting bigger and heavier. Runways must be built with a long-term vision. The concrete base of the airport runway must meet strict standards of strength and flexibility. Glass plastic reinforcement is an ideal product for the construction of the concrete base of the runway.

CONSTRUCTION OF BRIDGES AND OVERFLOWS
Bridges are vulnerable to both traffic stress and environmental factors. Glass-plastic reinforcement is intended for the construction of bridges and overpasses, which can easily withstand not only intense traffic loads, but also natural disasters, such as earthquakes and collisions. The use of fiberglass reinforcement in bridges will certainly lead to minimal maintenance costs.

TREATMENT FACILITIES
The use of chemical reagents, such as chlorine, fluorine or iodine, in the disinfection of drinking water, as well as ozonation, all this has a destructive effect on steel products, regardless of whether they are black, galvanized, coated with epoxy resin or even stainless steel elements. It is obvious that such disinfection is an absolute necessity to achieve the proper quality of water that will be distributed to surrounding houses and consumers. Therefore, it is also necessary to take all necessary measures to protect equipment and reinforced concrete tanks from the aggressiveness of these products.

CHEMICAL INDUSTRY
One of the most common ways of using glass and plastic fittings in the chemical industry is to create a lining that is resistant to corrosion and chemicals. This connection provides maximum protection of metal and concrete structures.
(//tractor-service.com)
SUBWAY CONSTRUCTION
Electric trains, in particular, require that magnetic or conductive reinforcing materials are practically not used. Glass plastic fittings are 100% non-conductive and non-magnetic. In addition, glass plastic fittings have twice the tensile strength of steel fittings. Therefore, glass and plastic reinforcement is the ideal form of reinforcement for the construction of railway transit systems.

INFORMATION AND MEDICAL FACILITIES
Medical or information technology structures must be built using fiberglass fittings to guarantee the absence of interference for thin circuits or equipment that generate a magnetic field or require very high electric current.

WALL REINFORCEMENT
Glass plastic fittings are an excellent product for the construction of stable and non-corrosive buildings. Thanks to its properties, the composite armature manages to ensure the strength of the structure, which can withstand high voltage and other possible negative external factors for a long time. Therefore, use our glass plastic fittings, regardless of whether you are building a single-story or high-rise residential complex.

Comparative characteristics
Characteristics
Steel
Glass plastic fittings
Note
Ultimate tensile strength
390 MPa
1000 MPa
The higher this indicator, the greater the load the structure will be able to withstand.
Modulus of elasticity
High modulus of elasticity
Low modulus of elasticity - vibration is extinguished quickly and without consequences.
The higher the indicator, the greater the bending load of the fittings in finished products.
Relative elongation
25%
2.2%
An indicator affecting the appearance of cracks in concrete. The lower it is, the less the material stretches, and the fewer cracks appear during operation.
Density
7 t/m3
1.9 t/m3
The higher the density, the greater the weight of the product.
Profile diameter
6-80 mm
4-32 mm

Length
6 and 12 m.
Any length, possibility of delivery in bays
The longer the length, the smaller the joint on long spans.
Thermal conductivity

A negative value indicates the absence of cold bridges and the preservation of heat
Electroconductivity

Being a dielectric, glass and plastic fittings do not interfere with cellular communication.
Durability
About 50 years.
About 50 years.
Composite materials are not afraid of corrosion, so their service life is longer.
Cost
Dependence on the price of the metal on the market.
The economy is due to a smaller diameter and weight both during construction and during transportation.

shotcrete concrete - application
Torcreting
A type of concrete works in which shotcrete-concrete mixture is applied to the treated surface under compressed air pressure. The advantage of shotcrete over other methods is the complete mechanization of processes combined in one technological operation - transportation, laying and compaction of concrete. Laid shotcrete has unique properties:
- increased mechanical strength (В 60-80 / Btb 3.6-6.0)
- frost resistance F 400-1000
- waterproofness > W 12
- adhesion with the treated surface > 2.0 MPa
- increased crack resistance.

Scope of application
- reinforcement of masonry and concrete structures
- strengthening of steel structures
- restoration of the concrete protective layer
- restoring profiles
- repair damage caused by wear, acids, gases, fire, explosions, frost and excessive load
- elimination of defects in the construction of concrete structures
- repair of bridges and retaining walls
- reconstruction of reinforced covered.
- fireproof protection

Protection of the territory and objects from flooding by construction of fiberfill anti-flood dams.
Annual damage from flooding is estimated at hundreds of millions of hryvnias. Floods take the first place among natural disasters in terms of frequency, coverage of territories and material damage.
According to UNESCO, ~10 million people died in floods over the last century (2 million people died in earthquakes and hurricanes); losses in the world are estimated at tens of billions of dollars, reaching 15% of the gross product in some countries.

Fixing pits, slopes, embankments
no formwork required
- quick set of concrete strength
- high strength B30-B80
- waterproofness W12-W16
- frost resistance up to F1000
- any finish finish
- economic efficiency

Technology and stages of soil stabilization work

Technology of repair and regulation

Storage molasses
For quick commissioning of the molasses storage m. the user has many