Repair of BCS, Sumy region.

Repair of grain separators БСС, БСС 25, БСС 50, БСС 100, БСС-50, А1-БСС-100
The company "Agropolyus"offers services current and capital repair of BCS grain separators, as well as carries out a full list of works on installation of the equipment, its integration into the technological lines of your grain processing complex.
Before starting the repair, the company's specialists will conduct a qualified assessment:
- volume of necessary repair works;
- a list of spare parts and mechanisms necessary for carrying out a full list of repair works;
After determining the list of necessary work and spare parts, the necessary sieves are also selected, the nomenclature of which depends on the type ofgrain processed at the Customer's enterprise.
After agreeing on the work, the list of spare parts, as well as a set of grates, we provide the Customer with a detailed estimate, which shows the cost of repair work, spare parts and mechanisms, and the terms of the work.
Overhaul of BCS type grain separators.
The following is a standard list of works usually performed during major repairs:
- Replacing the upper bearings of the rotor core;
- Replacing the cleaners as a whole;
- Replacement of connecting rod heads as a whole;
- Replacing the lower bearings of the rotor core;
- Replacement of silent blocks;
- Replacement of all belts;(//tractor-service.com)
- Replacement of counter-drive bearings and cuffs;
- Replacement of connecting rods;
- Replacement of electric motors;
- Adjustment of gaps of the grain separator;
- Welding works;
- Painting works;
- Replacement of grain receivers.
As mentioned above, the list of works is coordinated with the Customer and may differ from the standard list of performed works.
At the Customer's request, our company can deliver additional spare parts, as well as consumable work materials (sieves).
Installation of BCS grain separators.
In addition to repair work, "Agropolyus" specialists install and commission new equipment.
In the same way as in the case of repair works, the object is first studied, the method of integrating the grain separator into the technological line of the grain processing complex is agreed with the Customer, if necessary, auxiliary mechanisms are made (grain pipes, base frames for installing the grain separator, hoppers for waste removal, etc.).
The guarantee for the work carried out is 24 months, provided that the BCS grain separator is operated in accordance with the regulations described in the manufacturer's "Operating Instructions".
The warranty on spare parts is regulated by the distributor.
The cost of installation of the equipment is negotiated separately (depending on the volume of work on a specific object and the need for additional equipment).